How can we help?

Having trouble? Click here to access our troubleshooting guide.

Your Question:

Compact S24 & S30


The Heatline Compact S24 and S30 are a range of standard efficiency boilers that are not in production. Please check the frequently answered questions below for any help you may need. You can also click here to visit the appliance homepage.  

 

FAQs

 

What kind of Appliance is it?

This appliance is a standard efficiency combi boiler. This means it heats water when you draw a tap. It doesn't need a water storage tank or a cylinder because the boiler is connected directly to the water mains, heating water as its needed.

When was the boiler manufactured?

This boiler was first manufactured in 2002 and is not in production.

Is there a clock or roomstat available?

The Heatline Compact series is compatible with a broad range of third-party roomstats and clocks. They support volt-free as well as 230vac switching. For more information on roomstats you can contact an approved installer by clicking here.

What is the recommended water pressure?

Your boiler should be pressurised to between 1 to 1.5 bar. You can use the user manual for detailed instructions on how this is checked.

How do I top up the water pressure?

You can find help in topping up your pressure by clicking here. You can also find more information by downloading and checking the user manual below.

My boiler has a fault and I need some help?

Your boiler should work reliably for a number of years if it is serviced annually, however occasionaly faults can occur. In a lot of cases faults can be temporary and if the boiler is reset it will start working again. For the Compact you can reset it by rotating to the power dial to the 9pm position for 30 seconds and then returning it to its on position. We have created a special troubleshooting guide which you can access by clicking here which may help you resolve the issue. If you continue to experience problems please click here for contact information.

I am an Engineer. I would like technical information. Where can I get it from?

If you are a suitably qualified Gas Safe registered Engineer you can access our comprehensive technical help section by clicking here.

 

Available Literature

 

Installation ManualFlue Guide

Were we able to answer your question(s)?